The RE – 102 / 104 is a 2 / 4 zone microprocessor based conventional Fire Alarm Control Panel. The Panel accepts water flow devices, conventional input devices like 2 wire smoke detectors, pulls stations and other normally open contact devices. The Outputs include Notification Appliance Circuits (sounders), Three Form – C relays 2 for alarm, 1 for fault and RS485 port to interface with remote annunciator (Optional). It supervises all wiring, AC voltage and Battery level.
|Operating Voltage||24V DC|
|Power Supply||220V AC 50 Hz 24V DC|
|Operating Conditions||-10 to 45 deg C, 95% RH Max.|
|Normal Loop Voltage||20.7 DC|
|Open Threshold Current||4.2mA|
|Short Circuit Threshold Current||40mA|
|Stand by Threshold Current||8.2mA|
|Alarm Current||20-35 mA|
|Quiescent Current||60 mA|
|Colour of Panel||Broken White (Red, Red Texure – Optional)|
|Panel Size||350 x 250 x 100 (W x H x D)|
|Alarm Output (Common Hooter O/p)||24V @ 1A|
|Remote Outputs||Fire, Fault Relay Contacts (30V AV/DC @ 2A Contact)|
Note: Technical Specifications are subject to change without prior notice.
Disclaimer. We can not guarantee that the information on this page is 100% correct.