Aquasure Nano RO

AquaSure Nano RO is an RO purifier which is best suited for water with a high TDS & has a salty taste. It comes with an intensive and efficient multi stage RO purification process which removes excess TDS and all disease causing bacteria, viruses, protozoa, cysts, other physical & chemical impurities. Its in-built voltage stabilizer ensures that it works across a large voltage range and delivers 2 liters of safe, drinking water per minute.

Purifying Technology Reverse Osmosis (RO)
Applicable TDS Range in Input Water 500 – 2000 mg/litre
Recommended for Salty/Khaara/Brackish water
Check suitability for your water type here
Filtration / Purification Modules
(Click on modules to know more)
I-Cartridge?, Chemi Block?, EMLE?, Reverse Osmosis Membrane?, Post Carbon Cartridge?
Installation Type Table Top, Wall Mounting
Purified Water Flow Rate* 12 litre/hour
Storage Tank 4 Litres
TDS Reduction 90% (approx)
% Water Recovery 25% (approx)
Dimensions (W X D X H) in mm 281x198x413
Net weight 7.1 Kg
Operating/Input Voltage 230 V AC/50HZ
Power Rating/Consumption 30 Watts

See more Technical Specifications

RO Membrane 75 GPD
Membrane Type Thin Film Composite RO
Booster pump voltage 24V DC
Input Water Pressure* (max) 2.0 kg/sq.cm
Input Water Pressure* (min) 0.6 kg/sq.cm
Input Water Temperature 10°C – 40°C
Input Water Chlorine 0.2 mg/litre (max.)
Input Water Iron 0.3 mg/litre (max.)
Input Water Turbidity 15 NTU (max.)

Note: Technical Specifications are subject to change without prior notice.

* Flow rate depends on the input water pressure and condition of the filters.

*If the water pressure you receive is higher than the maximum specified, the use of a pressure reducing valve is recommended. The above accessory is available with our company at an additional cost.

*If the water pressure you receive is lower than the minimum specified, the use of an external pump attachment is recommended. The above accessory is available with our company at an additional cost.

Please check TDS level in input water before installation of RO purifier.

  • RO Purifier is suitable for input TDS: 500 – 2000 (PPM)

Disclaimer:- We can not guarantee that the information on this page is 100% correct.

Advertisements